Brake Winch 630kg & 1250kg
600 Series large drum capacity load brake winch contains a self activated, dual friction mechanism that automatically locks the load in position when the handle is released.
This allows the operator total control over the winch, whilst preventing accidental loss of load and at the same time eliminates the danger of free spinning handle.
- Description
Description
Features
- Heavy duty 4mm winch body
- Winch only
- Steel bushes
- Self actuating brake mechanism – see *note below
- Heavy duty friction disc pads
- Spare parts are available
- Electroplated zinc cobalt
- Powder coated finish
- Handle can detach
*NOTE:Â Requires at least 18kg to operate safely.
Specifications
| Gear Ratio | 8:1 | 15:1 |
| Application | Lifting / Pulling | Lifting / Pulling |
| Rated Capacity | 630kg (6174N) | 1250kg (12250N) |
| Mass (Winch only) | 20kg | 26kg |
| Type of Brake | Self Actuating | Self Actuating |
| Drum Diameter | 100mm | 100mm |
| Flange Diameter | 180mm | 180mm |
| Drum Width | 135mm | 135mm |
| Maximum Cable Capacity (6mm) | 45m not sup | 45m not sup |
| Maximum Cable Capacity (8mm) | 22m not sup | 22m not sup |
| Maximum Cable Capacity (10mm) | 15m not sup | 15m not sup |
| Max. Effort on handle at Rated Load | 19kg | 22kg |
| Recommended min. galv steel core cable to be fitted | G2070 7/19 | G2070 7/19 |
| Minimum cable sizes for 600 series Brake Winches | ||
| Cable (to above type) breaking strain | 6mm | 2712kg (min for 8:1 ratio) |
| 8mm | 3390kg (min for 15:1 ratio) | |
| 10mm | 5300kg | |
