First Aid Rescue Cage WP-NC2R-FAID

The WP-NC2R-FAID First Aid Rescue Cage has been designed in strict accordance with Australian Standard AS 1418.17 for rescue and evacuation on worksites where injured personnel need to be safely evacuated.




  • Suitable for use with a standard rescue stretcher
  • Can lift up to 6 persons
  • Full height gate that opens out for easy stretcher access
  • Fully enclosed mesh cage to give extra safety and protection in emergency lifts
  • Seat fitted for non-stretcher personnel
  • Fitted with 8 (eight) safety harness anchor points and internal hand rails
  • Comes with rated lifting chains
  • Built in fork pockets are for transport only
  • Work performed in this cage shall be limited to special tasks of short duration
  • Load test certificate, risk control measure documents, work cover registration and detailed instructions supplied
  • Zinc finish


  • AS 1418.17


Maximum Capacity  6 people
 Working Load Limit (WLL)   750kg
 Dimensions 2400 x 1200 x 2352mm          
 Gate Opening 700mm wide
 Unit Weight 500kg

It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel.